Common Misconceptions and FAQs When Selecting an Ultrasonic Welding Machine

2026-11-05

FONT

Choosing the right ultrasonic welding machine deserves careful consideration. The right machine can significantly improve production efficiency, yet many manufacturers struggle to decide which model to buy. Here are some common selection mistakes and frequently asked questions that may help.Common selection mistakes

 

1、Choosing a machine with excessive power: Too much power can lead to over-welding, cracking, or damage to the horn and tooling. More power is not always better.
2、Ignoring material compatibility: Trying to weld PVC or silicone with ultrasonic welding is unlikely to succeed.
3、Skipping sample testing: Ordering based only on the specifications can result in parts that do not weld properly once the machine arrives.
Underestimating horn costs and lead times: Welding horns often require custom fabrication, so their cost and delivery time can affect production ramp-up.
4、Focusing only on the purchase price: Long-term electricity and compressed-air costs, spare parts, and downtime should also be considered.

 

 


Q: Can an ultrasonic welding machine weld all plastics?

A: No. Ultrasonic welding is generally suitable for thermoplastics that can be remelted, such as ABS, PC, PP, and PA. PVC, TPU, silicone, foamed materials, and thermosetting plastics are generally unsuitable.
Q: How do I choose between 15 kHz and 20 kHz?

A: Choose 15 kHz for larger parts, thick walls, and hard plastics, as it offers stronger penetration. For general-purpose applications, 20 kHz is the most common and cost-effective option. For small, precision parts, consider 30 or 35 kHz.
Q: Is more power always better?

A: No. Insufficient power can cause weak welds, while excessive power can cause over-welding and cracking. Select power based on the weld area and material, with a modest margin so the machine does not have to run at full capacity continuously.
Q: Should I choose a pneumatic or servo-driven machine?

A: Pneumatic machines are a good choice for small-batch production and tighter budgets. Servo-driven machines offer more consistent closed-loop control of pressure and position, making them better suited to precision welding, automated production lines, and medical or automotive components.
Q: Can one machine weld different products?

A: Yes. If the machine has sufficient frequency and power, you can usually switch products by changing the fixture and horn, then selecting the appropriate saved welding recipe.
Q: Should I request sample testing before purchasing?

A: It is strongly recommended. Sample testing lets you assess weld strength, appearance, and process stability, making it one of the most cost-effective ways to reduce selection risk.

 

 

Keywords:


Other Information


Why Choose Ultrasonic to Make Your Products?

The ultrasonic industry has been thriving for decades, expanding from high-end aerospace applications to  sectors such as consumer electronics, the automotive industry, medical devices, and the new-energy sector. According to the traditional process, using the dispensing method and the riveting method, there will be a  structure that cannot guarantee watertightness and airtightness, and cannot guarantee long-term use. In this case, the ultrasonic process has been pushed onto the historical stage, because ultrasonic welding has the characteristics of environmental protection, no pollution, and can ensure watertightness and air tightness, which is very recognized by customers.

Product Inquiry

*Note: Please fill in the information accurately and keep the communication open. We will contact you as soon as possible.

Submit