Introduction to Ultrasonic Welding Machine Basics and Welding Materials
An ultrasonic welding machine is equipment that uses high-frequency mechanical vibration (15–40 kHz) to generate frictional heat at the contact surfaces of plastics or metals, locally melting and pressure-bonding the materials. It is a clean welding method featuring 'cold molds and thermal joining,' requiring no welding rods, no glue, and producing no smoke or dust.
1. Thermoplastics: ABS, PS, PMMA (Acrylic), PC, SAN, modified PP, modified PE, PA (Nylon), etc.
2. Metals (dedicated metal welders): Copper, aluminum, nickel, silver, commonly used for wire harnesses, battery tabs, and flexible connectors.
3. PVC, TPU, silicone, foam materials — prone to mold sticking, difficult to melt, or suffering from severe energy dissipation.
4. Thermosetting plastics (e.g., Bakelite, epoxy resins) — cannot be joined through re-melting.

One-sentence rule of thumb: The prerequisite for ultrasonic welding is that 'the material can be re-melted and bonded under pressure.' Before purchasing equipment, make sure to confirm which category your material belongs to.
Material determines 'whether it can be welded' and 'how well it can be welded,' serving as the starting point for equipment selection. Easy-to-weld materials include ABS, PS, PMMA, PC, and SAN, which offer easy welding, low energy requirements, and a wide process window.
Semi-crystalline / difficult-to-weld representative materials include PP, PE, and PA (Nylon), which are more difficult to weld and require higher energy and stricter control.
Filled and modified materials (glass fiber reinforced, mineral filled): weldability varies by case; settings differ from pure resins and require trial welding for confirmation.
Metals (dedicated machines): representative materials include copper, aluminum, nickel, and silver. Only ultrasonic metal welders can weld them; they are not interchangeable with plastic welders.
Materials like PVC, TPU, silicone, and foam are generally not recommended for
Key points: Dissimilar metal welding (such as copper-aluminum) requires equipment support for horn adaptation and dynamic pressure adjustment to prevent the formation of brittle phases; the higher the filler content, the more critical it is to perform on-site sample testing for verification.
Keywords:
Other Information
Why Choose Ultrasonic to Make Your Products?